الصفحة الرئيسية
/
الاقسام/
Digital Dentistry/
Digitalize the Dental Clinic: A Complete Guide to Designing and 3D Printing
Digitalize the Dental Clinic: A Complete Guide to Designing and 3D Printing
السعر الرسمي :
$350.00
السعر للأطباء خارج العراق:
$20.00
السعر للأطباء داخل العراق:
20 ألف دينار عراقي
--
عدد مرات الشراء
معرف التليغرام لتسليم طلبك والتواصل *
كيف تعرفت علينا؟ (اختياري)
Category: Digital Dentistry
Instructor(s): August de Oliveira
Course structure: Lessons: 18 lessons
Course overview
Everything you need to know about 3D printing in the dental office with Dr. August de Oliveira, a leading digital dentistry specialist in the USA.
The course includes step-by-step video demonstrations of design and 3D printing using Blue Sky Plan® and Rayware software.
With the right equipment and this virtual training by Dr. Oliveira, you will transform your dental clinic to a fully functioning digital practice.
What you will learn
- Perform virtual smile design
- Work with FDM, SLA, LCD, DLP, CDLM, and SLS 3D printers
- Operate the most popular intraoral scanners
- Upload STL and DICOM files
- Manufacture:
- In-office dental implant surgical guide
- Implant-supported digital hybrid dentures (ALL-ON-4®)
- Locator-retained overdenture
- Bar-retained overdentures
- Monolithic digital removable dentures
- In-office aligners
- Digital nightguards and Essix retainers
Course lessons
Lesson 1. Free example. Introduction to 3D printing in dentistry
- Historical overview of 3D dentistry
- 3D printers in modern digital dentistry and digital dental laboratory
- Application of 3D printers in daily dental practice: what can we print with 3D printers?
- A review of scanners on the market and cost analysis
- STL files and their application in 3D printing
- Axis milling vs 3D printing
- 3D printer set-up: from PC specs and requirements, to materials and their application
- The basic 3D printing process
- Anatomy of 3D printers
- Comparing 3D printers that are available in the market (laser printers, DLP, LCD, CLIP/CDLM, and powder based printers).
Lesson 2. Fused Deposition Modeling Printers: Prusa and Arfona
- How do fused deposition modeling printers (FDM) work?
- The significance of FDM printers
- FDA and ISO approved materials and "Non Dental" FDM
- Printing Valplast using Arfona printer
- Clinical case: printing a Valplast partial denture using Arfona 3D printer.
Lesson 3. Laser SLA Printing and the Form3B. Application and Set-up of Preform Software
- The full process of SLA laser printing
- The features of Form3B printer by FormLabs
- Dental resins that are available for the Form3B printer
- Accessories and products that you need for a complete 3D printing experience
- Clinical cases and application of SLA laser printer: fabrication of Essix retainers
- Using the Preform software for Form3B printers: step-by-step guide of the set-up
- Step-by-step demonstration of how to load and orient models in the preform software.
Lesson 4. DLP Printers: The Sprintray Pro and the Asiga Max
- The full process of DLP printing
- Understanding precision and resolution
- Workflow experience of DLP printing
- Full description of the Asiga Max and the Sprintray Pro printers
- Clinical case with the Sprinray Pro printer: printing of a dental implant surgical guide
- Clinical case with the Asiga Max printer: printing of temporary implant supported digital hybrids (ALL-ON-4®)
- Using the Rayware software for Sprintray Pro or Moonray Printer
- From Intra Oral Scanner to printed model: demonstration of new model editing features to add and trim a base.
Lesson 5. LCD Printers like the Anycubic Photon or the Phrozen
- The required build plate size
- How to make a duplicate a nightguard using anycubic photon
- Horizontal or vertical printing, which method is better?
Lesson 6. CDLM or CLIP Printers, and SLS: Envision One by EnvisionTEC, Carbon, and Fuse Printers
- How does the Continuous Digital Light Manufacturing (CDLM) or the Continuous Liquid Interface Production (CLIP) printer operate?
- Full overview of the carbon and envision one printers
- Clinical cases with envision one and carbon printers
- Workflow of manufacturing and printing of implant supported digital hybrids (ALL-ON-4®)
- EnvisionTEC CDLM technology
- Multi color 3D printed hybrid dentures
- Powder based SLS printers
- Step-by-step demonstration of preparing and printing an implant supported digital hybrid (ALL-ON-4®).
Lesson 7. IntraOral Scanners (IOS): CEREC Omnicam, Primescan, TRIOS, Itero, and Medit
- Application of IntraOral scanner in modern digital dentistry
- Same-day dentistry
- Comparing of IntraOral Scanners based on trueness and precision
- Conventional vs digital workflow: advantages
- Intraoral scanners vs lab scanners
- Application of Face Scanners in dentistry
- Photogrammetry scanners
- Isolation and heme control when intraoral scanning
- Intraoral scanning technique
- Clinical case: step-by-step demonstration of emax crown from intraoral scanning on Medit to preparing the STL file on EXOCAD for 3D printing
- Step-by-step demonstration scanning a case for an implant screw-retained restoration using Medit.
Lesson 8. Guided Implantology: theory and clinical cases. Part 1
- Rationale of guided implant surgery. Why is guided dentistry a mandate for implant placement?
- Advantages and disadvantages of guided surgery
- The digital implantology workflow
- Oral examination: diagnosis and treatment planning for guided implant surgery
- The difference between 2D and 3D for treatment planning
- Analysis of CBCT scans
- Radiation dose of CBCT scans
- Patient position in CBCT scans
- Exporting Digital Imaging and Communications in Medicine files (DICOM) from CBCT software to 3rd party processing
- Exporting STL files from IntraOral Scanner softwares
- Head and neck anatomy for guided implantology. What are we looking for?
Lesson 9. Guided Implantology: theory and clinical cases. Part 2
- Analysis of bone density: D1, D2, D3, and D4
- Implant setting and digital insertion
- Types of guides:
- printed and lab made guides
- edentoulsy guides
- stackable guides
- pilot guides.
- Utilizing pink porcelain and how to use it for final implant aesthetic restorations.
Lesson 10. Guided Implantology. Step-by-step Designing of surgical implant guides on Blue Sky Plan Wizard Software
- Designing a simple lower posterior surgical guide with the BSP wizard:
- select and upload the DICOM files
- detect the right and left mental foramen and the lower alveolar mandibular nerve
- import STL models
- model alignment. Emerging CBCT with STL files
- scaling of the crown size
- adjusting the implant position
- drawing and fabricating the implant guide.
- Preparation for anterior Immediate implant placement guide in BSP:
- tooth erasing from the model of intraoral scan
- filling in the erased space in the model.
- Anterior Immediate Guide in BSP: Planning the Guide:
- select and upload the DICOM file
- matching the STL file with CBCT scan
- Tooth library and the tooth crown form selection
- Implant feature selection: orientation, implant system (BioHorizons), and size
- implant and crown positioning in the model
- draw the guide curve
- create and verify the surgical guide
- save the surgical guide report by BSP and evaluate the information.
- Anterior Immediate Guide in BSP: step-by-step demonstration of printing the Guide using SprintRay Pro
- Step-by-step video demonstration of designing a 3-unit implant guide in the advanced module on Blue Sky Plan
- The outer diameter of guide tube, the guide height, and the Sleeve Offset technique
- Printing the implant guide.
Lesson 11. Digital Implant Workflow. Part 1
- Digital implant sequence:
- implant scan, the emergence profile, and bite
- design and mill in-house or in laboratory
- the option of printing an analog model.
- What are scan bodies and Ti bases
- The limitations of Ti bases
- Implant direct smart base (SMARTbase™)
- Digital designers and milling centers
- The popular scan body systems:
- Elos Accurate® Scan Body
- 3Shape scan bodies.
- Abutment design in CEREC
- The screwmentable implant restoration
- Clinical case of milling a crown for an implant In-Office
- DESS® prosthetic abutments for dental implants: components
- CAD/CAM implant materials:
- temporary materials: Telio CAD and VITA CAD-Temp®
- hybrid composite: VITA ENAMIC®
- Zirconia blocks: KATANA Zirconia
- Lithium Disilicate: Celtra® Press.
- Step-by-step demonstration of Designing screw retained crowns and implant abutments in CEREC:
- scanning of the abutments: gingival mask, buccal bite, scan body;
- material selection and restoration type (screw retained or abutment and a crown).
- The emergence profile and the benefit of custom implants
- The screwmentable restorations
- A walk through a complete digital case.
Lesson 12. Digital Implant Workflow. Part 2
- Adding a Base to a Model in Blue Sky Plan
- Dual Buccal Bites in Blue Sky Plan
- Step-by-step demonstration of designing and printing a temporary crown using Blue Sky Plan and Rayware printing software:
- defining the margin line
- digital evluation of the path of insertion
- identifying the proximal contacts
- dental library and tooth shape selection
- adjusting the contact area by adding or reducing materials
- occlusion evaluation
- printing of the crown on Rayware using a SpringRay Pro printer.
- Step-by-step demonstration of designing a temporary crown on a Ti Base using Blue Sky Plan software:
- uploading of STL models of the upper and lower jaw
- selection of the scan body
- teeth geometery: tooth shape selection and abutment type selection
- crown postioning and path of insertion
- crown occlusal evaluation.
- Step-by-step demonstration of designingand printing a temporary bridge using Blue Sky Plan and Rayware software:
- teeth selection for the bridge
- teeth scalling: boolean addition and subtraction
- occlusal evaluation
- path of insertion
- printing of the one unite bridge using a SpringRay Pro printer.
- 3D printed implant analog models using the Asiga Max printer: video demonstration on how to assemble an implant analog model.
Lesson 13. Digital Model of Implant-supported Hybrid Prosthesis (ALL-ON-4®). Part 1
- What do you need to think about before the start of a hybrid prosthesis restoration?
- Photogrammetry
- How to align the bite scan with the scan body scan?
- the placement of composite fiducial markers such as "liquid dam" for intraoral scanning
- Intraoral scanners, laboratory scanners, and photogramettry
- Multiunit abutments vs implant level
- Angulation correction and tissue height
- Face scan bite
- Ziroconia Hyrbrid implant restoration in two appointments, is it possible?
- Ziroconia Hybrid implant restoration: clinical case
- Advantages and disadvanatges of various types of digital hybrids:
- PMMA or 3D printed hybrid "temporaries"
- Solid zirconia
- metal frame
- component hybrids.
Lesson 14. Digital Model of Implant-supported Hybrid Prosthesis (ALL-ON-4®). Part 2
- Clinical cases: a step-by-step treatment with a locator retained overdenture:
- Clinical cases: a step-by-step treatment with a Bar retained overdenture
- Advantages of metal bar and PMMA implant-supported hybrid prosthesis
- Repair of implant-supported hybrid prosthesis
- Duplicating and printing the hypride denture.
Lesson 15. Digital Removable Dentures using BSP
- Intraoral edentulous scans: is it possible to scan dentures directly in the mouth of a patient?
- The process of making a digital denture: printed or milled
- Step-by-step demonstration of a full arch scan patterns for edentulous
- Monolithic digital denture
- Step-by-step demonstration of designing and printing a Digital Denture in Blue Sky Plan
- Designing and operating with meshmixer
- Combining Denture Teeth into a chain for printing
- Printing the denture base in Rayware
- Combining denture teeth and denture base into a monolithic denture. Exporting a Monolithic Denture from Blue Sky Plan
- Printing the Monolithic Denture in Rayware
- Assembling two piece monolithic denture:
- painting a monolithic denture with flowable composite
- the final product: an assembled two piece monolithic denture.
Lesson 16. Digital Orthodontics: Aligners and Indirect Fixation Transfer Tray
- The available options with aligners: Invisalign®, eXceed, and archform
- 3D printing guidelines of aligners by the American Board of Orthodontic
- How do aligners work?
- Classification and function of attachments:
- horizontal rectangular attachments
- single ellipsoid attachments
- paired ellipsoid attachments.
- Clinical case of a class 1 patient with severe crowding using eXceed ortho:
- case treatment design on eXceed
- IPR guide
- printing of the appliance.
- Which sheet thickness size to order for aligner therapy?
- Aligner treatment planning:
- root angulation
- buccal/lingual tipping
- gingival height and extrusion.
- Clinical case using archform software
- Indirect bracket tray manufacturing
- Digital lingual retainers
- Step-by-step demonstration of ordering treatment plan and design on eXceed ortho:
- adding a new patient
- order placement
- uploading the 3D models of the upper and lower jaw
- uploading x-rays
- uploading intra and extraoral photos
- inputting the treatment plan
- printing aligners using a SpringRay Pro printer.
Lesson 17. Diagnostic Wax Ups and Virtual Smile Design using BSP. 3D Printed Night Guards
- DSD wax-up and crown lengthening
- Gingivectomy and incisal length
- Manufacturing of gingival reduction guide
- Step-by-step demonstration of virtual wax ups using Blue Sky Plan Wizard software
- Printing of diagnostic wax up using a SpringRay Pro printer
- 3D Printed Nightguards:
- which night guards can you 3D print
- designing night guards
- hard or soft night guards.
Lesson 18. Medical Billing
- Documentation of clinical cases
- What does medical insurance usually pay for?
- Medical billing to dental insurances: how to fromalate your requests.
